Investing time in regularly cleaning and inspecting hand tools will make them last longer. Moisture and corrosion are the biggest threats to tool longevity, so keeping them dry will go a long way in protecting them.
Always fully recharge batteries before storing power tools. This will help them retain their charge and perform at peak levels when needed again.
Clean and lubricate
Cleaning and lubricating hand tools are one of the most essential maintenance tips for longevity and peak performance. After use, clean tools with an approved cleaning solution and wipe them down to remove any remaining dust or debris before returning them to storage. This is also an excellent time to check the tool for damage, such as splinters, breaks, and cracks. Also, look for signs of wear and tear, such as rusted metal parts or worn blades. If the tool shows signs of wear and tear, consider replacing them with new tools to extend their lifespan.
When it comes to lubricating tools, it is recommended that users consult the tool’s owner’s manual, as different power tools require specific types of lubricant. In general, using a standard machine oil such as silicone spray on moving parts of the device helps prevent heat build-up and friction which can lead to premature wear and rust.
It is also a good idea to store tools in a dry environment. Moisture in a workshop or storage area can cause devices to rust and lose their electrical components. Keeping tools stored in a protective case can help prevent this damage. If you don’t have a chance to store your tools, silica gel packets designed to absorb moisture can be placed in the toolbox to keep it dry and protect the devices from corrosion.
Check for damage
In addition to cleaning and lubricating, it is vital to check hand tools like the CNC spindle for damage before they are used regularly. This includes checking for splinters, cracks, or breaks in wooden handles and metal parts that show signs of corrosion or rust. Ensuring all auxiliary parts are correctly attached and not loose or worn is also essential. Inspecting for damage can help prevent injuries caused by using a damaged tool and reduce costly repairs and replacements.
Inspecting for damage is also essential for safety, as hand tools commonly cause workplace injury. For example, a cracked wooden handle on a hammer or axe could break under stress, potentially leading to an accident. Workers must inspect all hand tools before use and report any problems immediately to their supervisors.
It is also essential to regularly inspect hand tools for any electrical issues. This includes checking the cords for snags, cuts or tears, and broken or bent prongs. It is also essential to replace any fractured 3-prong plugs with new ones, as it can be dangerous for anyone who uses the tool if the third prong isn’t connected correctly. In addition, it is essential to regularly test the tool’s battery to make sure that it is still in good working order and not prone to overheating.
Hand Tools Safety
Hand tools pose various hazards depending on the device and the work type. Many of these hazards come from misuse and improper maintenance.
Inspecting your hand tools can help you identify and repair worn or damaged parts as needed. A basic check can include a visual examination for any signs of damage, checking the handle for splinters or breaks, and ensuring that all metal parts show no signs of corrosion or rust. It is also a good idea to run the tool through its basic operations, paying particular attention to any areas of weakness or slow performance.
You should also watch for any components known to wear or break, such as carbon brushes in electric drill motors or power cords and switch assemblies in saws and hammers. If you see any of these parts wearing out, replacing them now will save you the cost of returning the entire tool later.
Finally, wipe down all your tools after each use to remove any remaining grease before storing them for the next project. There are various cleaning products available that can be used to remove grease from tools, but you can also use an old towel or rag and some water.
After cleaning and lubricating tools, it is essential to store them properly. If left improperly stored, metal tools will develop rust, and wood tools can become warped or cracked. Store tools in a dry area with a temperature that remains consistent. It is also a good idea to label toolboxes and keep an inventory of all devices in the box. This helps prevent losing or misplacing tools and saves time searching for them when needed.
Ideally, clean your tools before and after every use. This is not a time-consuming task, but it will help extend their life and prevent unnecessary wear and tear from prolonged exposure to dirt and moisture. Wiping down each tool after using it with a damp cloth or towel can make a big difference in the health of your devices.
If you store power tools for long periods, drain the air compressor regularly and avoid letting it sit unused for extended periods. This will help the batteries stay at peak performance and reduce the amount of condensation in the toolbox. Adding silica gel packs to the toolbox is also a great way to absorb excess moisture and keep your tools in shape.